If it has been a few years since you serviced your brakes, chances are good you have a leaky wheel cylinder somewhere.  These get pitted over time, the seals get chewed-up by the pitting and then they leak. So check your wheel cylinders every time you remove your tires-you can get a quick read of their condition by looking through the brake adjusting hole. If you see any wetness or corrosion evident, remove the drum immediately and inspect. Once the cylinders leak, your shoes will soon get wet and the brakes will no longer work.

We sell a premium cylinder made in England which we have found to last longer than the inexpensive Asian made reproductions one commonly finds online. We recommend that you buy the best cylinders possible, so you get the greatest longevity. No one wants to re-do this job any sooner than needed. 

This cylinder fits all original 948 cars.

If you need the driver side to go along with this one, we

If you are replacing both of these cylinders, you should be sure you have a good  between the two.

NOTE:

• 2 wheel cylinders are required for each front wheel (total of 4 wheel cylinders for both front wheels).
• 1 wheel cylinder is required for each rear wheel (total of 2 wheel cylinders for both rear wheels).
• If you discover a leaky wheel cylinder, you should replace the and clean the drum with brake clean.
• We recommend you replace your as well as the & . You can purchase them individually, or all together in our  .